Pneumax - Hauptkatalog Strana 808
Nabídka komerčních zákazníků **Nejlépe prodávané z Pneumax GmbH
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Microbore cylinders according to standard ISO 6432 Series 1200 Steel line Series 1200 Steel line General The 12X stainless steel ISO 6432 microbore cylinders series are designed for corrosion resistance application such as marine, pharmaceutical and food ambiences. The pre lubrication grease used is NSF H1 certified for food application. Specific care has been taken during the design stages and the result is a clean profile cylinder easy to clean and free from possible residue build-up areas. All parts in contact with the external environment are in Stainless steel 316L and the seals are available in three different compounds for different temperature applications: PUR -30C° - +80C°, FPM -5°C - +150°C and NBR -5°C - +70°C. The range starts from 16 bore up to 63 bore, double acting version standard or with through rod, magnetic or not magnetic piston available. The end caps are crimped onto the barrel for bore sizes 16 to 25 and screwed on the barrel from 32 to 63 bore. Depending on the type of mounting required it is possible to choose different end caps style. The piston is aluminium and the sensor bracket, when required is in stainless steel 316 with plastic adaptor or in plastic material. The cylinder can be fixed with the wide range of stainless steel accessories. Construction characteristics End caps, barrel, piston rod Stainless steel AISI 316 Piston Aluminium Seals NBR (PUR piston rod seals) FPM 3 PUR Pneumatic actuatiOn Fixing / Accessories AISI 316 / 304 Operational characteristics Fluid Filtered air. No lubrication needed, if applied it shall be continuous. Max. pressure 10 bar Bore Ø 16 - 20 - 25 - 32 - 40 - 50 - 63 Cushioning lenght mm 15 - 18 - 18 - 18 - 22 - 22 - 25 Operating temperature Seals material Operating temperature NBR -5°C - +70°C -5°C - +80°C -5°C - +150°C -5°C - +70°C FPM PUR Piston Magnetic Non magnetic Cushioning Pneumatic adjustable Bores Pneumatic fix -30°C - +80°C Ø16-Ø20-Ø25-Ø32-Ø40-Ø50-Ø63 Ø16-Ø20-Ø25-Ø32-Ø40-Ø50-Ø63 Ø16-Ø20-Ø25-Ø32-Ø40-Ø50-Ø63 Ø16-Ø20-Ø25-Ø32 Ø16-Ø20-Ø25-Ø32 Ø40-Ø50-Ø63 Please follow the suggestions below to ensure a long life for these cylinders: •use clean and lubricated air •correct alignment during assembly with regard to the applied load so as to avoid radial components or bending the rod. •avoid high speeds together with long strokes and heavy loads: this would produce kinetic energy which the cylinder cannot absorb, especially if used as a limit stop (in this case use mechanical stop device) •evaluate the environmental characteristics of cylinder used (high temperature, hard atmosphere, dust, humidity etc.) Please note: air must be dried for applications with lower temperature. Our Technical Department will be glad to help. Standard strokes Ø16 : 15 - 25 - 50 - 75 - 80 - 100 - 150 - 160 - 200 - 250 - 300 mm Ø20 - Ø25 : 15 - 25 - 50 - 75 - 80 - 100 - 150 - 160 - 200 - 250 - 300 - 320 - 350 - 400 mm Ø32 - Ø63 : 15 - 25 - 50 - 75 - 80 - 100 - 150 - 160 - 200 - 250 - 300 - 320 - 350 - 400 - 450 - 500 mm 3 | 12 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice
1106 Stránky | Platí do 06/2025 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.