Pneumax - Hauptkatalog Strana 506
Nabídka komerčních zákazníků **Nejlépe prodávané z Pneumax GmbH
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Solenoid valves manifold Series 2500 "OPTYMA-T" Series 2500 "OPTYMA-T" General Air distributiOn 1 With the introduction of the “T” configuration of solenoid valves with integrated pneumatic connections fitted directly on the sub base the 2500 series (called OPtYMA) is now richer than ever. Many technical features make the new product interesting: - Flow rate of 800 Nl/min - tie rod system to hold the sub bases together - All pneumatic connections (push-in) on the same side of the manifold - Quick mounting of the valve to the base using just one screw - Possibility to replace the valve without the need to disconnect the connections - Possibility to use different pressures along the manifold (including vacuum) - iP65 environmental protection - Electrical connection directly integrated into the base, 32 electrical signals available (can be used to build up a manifold of 32 monostable valves, 16 bistable valves or any combination within that limit). - the electrical connection is made via 37 pin d-sub connector. - it is also available a 25-pole connector that is able to manage a maximum number of 22 electrical signals. Possibility to integrate with Field bus modules CAnopen®, PROFIBUS DP, DeviceNet, EtherNet/IP, PROFINET IO R T/IRT and EtherCAT®. Possibility to connect input modules, even on the base that does not have the Field Bus module. Large use of technopolymer material reduces the overall weight of the manifold. "Shifting time of pneumatic directional control valves or moving parts, logic devices were measured in accordance to ISO 12238:2001, Pneumatic fluid power-Directional control valves-Measurement of shifting time" Main characteristics integrated and optimized electrical connection system. iP65 protection degree. Only one 19mm size Electrical line connections on one side Monostable and bistable solenoid valves with the same size dimensions. Easy and fast manifold assembly - tie rod system to hold the sub bases together Quick coupling connections directly integrated in sub base Easy and fast manifold assembling. Construction characteristics body technopolymer Operators spacers spacer spools springs Pistons Piston seals technopolymer nbr technopolymer Nickel - plated steel / Technopolymer Aisi 302 stainless steel technopolymer nbr Functions SV 5/2 MONOSTABLE SOLENOID-SPRING SV 5/2 MONOSTABLE SOLENOID-DIFFERENTIAL SV 5/2 BISTABLE SOLENOID-SOLENOID SV 5/3 C.C. SOLENOID-SOLENOID SV 2x3/2 N.C.-N.C. (=5/3 O.C.) SOLENOID-SOLENOID SV 2x3/2 N.O.-N.O. (=5/3 P.C.) SOLENOID-SOLENOID SV 2x3/2 N.C.-N.O. SOLENOID-SOLENOID Technical characteristics 1 | 486 Voltage 24VDC ±10% PNP (NPN and AC on request) Pilot consumption Pilot working pressure (12-14) Valve working pressure [1] Operating temperature Protection degree Life (standard operating conditions) Fluid 1,3 Watt From 3 to 7 bar max. from vacuum up to 10 bar -5°C +50°C iP65 50000000 Filtered air. no lubrication needed, if applied it shall be continuous Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice
1106 Stránky | Platí do 06/2025 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.