Pneumax - Hauptkatalog Strana 441
Nabídka komerčních zákazníků **Nejlépe prodávané z Pneumax GmbH
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Solenoid valves manifold Series 2200 "OPTYMA-S" Series 2200 "OPTYMA-S" General “Shifting time of pneumatic directional control valves or moving parts, logic devices were measured in accordance to ISO 12238:2001, Pneumatic fluid power-Directional control valves-Measurement of shifting time” Main characteristics One size: 12.5mm thick Monostable and bistable valves with same dimensions Modular subbase with two positions Modular subbases assembled via tie rods Quick coupling connections directly integrated in sub base integrated and optimized electrical connection system. iP65 protection grade as standard Construction characteristics body technopolymer Operators spacers spacer spools springs Pistons Piston seals technopolymer nbr technopolymer Aisi 303 stainless steel Aisi 303 stainless steel technopolymer nbr Functions SV 5/2 MONOSTABLE SOLENOID-SPRING SV 5/2 MONOSTABLE SOLENOID-DIFFERENTIAL SV 5/2 BISTABLE SOLENOID-SOLENOID SV 5/3 C.C. SOLENOID-SOLENOID SV 2x3/2 N.C.-N.C. (=5/3 O.C.) SOLENOID-SOLENOID SV 2x3/2 N.O.-N.O. (=5/3 P.C.) SOLENOID-SOLENOID SV 2x3/2 N.C.-N.O. SOLENOID-SOLENOID SV 2x3/2 N.O.-N.C. SOLENOID-SOLENOID Technical characteristics Voltage 24VDC ±10% PNP (NPN and AC on request) Pilot consumption Pilot working pressure (12-14) Valve working pressure [1] Operating temperature Protection degree Life (standard operating conditions) Fluid 0,5 Watt from 2,5 to 7 bar max. from vacuum to 10 bar max. from -5°C to +50°C iP65 50000000 Filtered air. no lubrication needed, if applied it shall be continuous Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 1 | 421 1 Air distributiOn Optyma32-s has been designed in order to complete the Optyma series of valves. Optyma–s,12.5mm size, integrates all the technical features already developed and implemented on the Optima t & F such as the integrated electrical connection. Further technical specifications are: - Flow rate: up to 550[Nl/min], using the modular base with Ø8 quick fitting tube. - Modular base available with Ø4, Ø6, Ø8 quick fitting tube. - the solenoid pilots are low consumption and fitted on the same side of the valve. - Mono and bistable valves have the same dimension. - Easy a nd fast assembly on the sub base t hanks to t he “one screw” mounting solution. - Possibility to replace a valve without the need of disconnecting the pneumatic pipes. - Electrical and pneumatic connections positioned on the same side. - Possibility to operate with different pressures and vacuum. - Management of 32electrical signals,(16 bi-stable or any combination off mono and bi-stable vales up to max 32 signals). - the protection grade is iP65 directly integrated in the manifold components. - the electrical connection is achieved thanks to a 37 pole connector. - Possibility to integrate with Field bus modules CAnopen®, PROFIBUS DP, DeviceNet, EtherNet/IP, PROFINET IO RT/IRT, EtherCAT® and CC-Link IE Field Basic.
1106 Stránky | Platí do 06/2025 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.