Pneumax - Hauptkatalog Strana 303
Nabídka komerčních zákazníků **Nejlépe prodávané z Pneumax GmbH
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
“NAMUR” valves and solenoid valves Series 514/N Series 514/N General the 514/N solenoid valves, are 2 stage valves actuated electro-pneumatically. A series 300 directly operated solenoid valve actuates pneumatically the principal power distributor. Everything is well integrated in a practical configuration that also permits applications where there is limited space. used primarily to operate rotary actuators and wherever there is a NAMUR standard installation plan. the pilot air is normally taken from the inlet port (autofeed) and the only actuating signal is electric. the range of the solenoid valves, as far as dimensions and mechanical construction, is similar to series 200. We have therefore solenoid valves G 1/4" with identical pneumatic characteristics that are, however, actuated electrically. They have a balanced spool, insentive to presence or absence of pressure. they are constructed in 3 and 5 way with 1 solenoid (monostable) or 2 solenoids (bistable). Air distributiOn “NAMUR” interface dimensions: according to standard (VDI/VDE 3847 July 2003) Construction characteristics body spacer seals springs Operators spools screws 1 Aluminium technopolymer nbr spring steel Aluminium nickel plated steel Zinc coated steel Use and maintenance this valves have an average life of 15 million cycles depending on the application and air quality. Filtered and lubricated air using specified lubricants will reduce the wear of the seals and ensures long and trouble free operation. Please ensure that the valve is being used according with the manufacturers specification, such as air pressure and temperature. the exhaust port of the distributor has to be protected in a dusty and dirty environment. repair kits including the spool complete with seals are available for overhauling the valves. However, although this is a simple operation it should be carried out by a competent person. ATTENTION: use hydraulic oil class H for lubrication such as MAGnA GC 32 (Castrol). Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 1 | 283
1106 Stránky | Platí do 06/2025 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.