Pneumax - Hauptkatalog Strana 129
Nabídka komerčních zákazníků **Nejlépe prodávané z Pneumax GmbH
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Spool valves and solenoid valves Series T400 Series T400 General the series T400 involves a wide range of valves and solenoid valves, with several type of acting, with connections from G1/8" (T488) and G1/4" (T424), are manufactured with high performance technopolimer. the use of technopolymer has resulted in a light weight product which can be offered to the market at very interesting prices. the gang mounted solenoid valves are available with the traditional manifold obtained from bored square bar of series 600 and with the extruded aluminium base allowing a unic inlet port conveying the exhausts. The base is also prearranged to be fixed on DIN 46277/3 guide. the solenoid valves series G1/4" (T424), are manufactured, depending on version and actuation (manual, pneumatic, or electrical), and self aligning (pneumatic - electric or spring) 3/2, 5/2 and 5/3 ways function, (monostable), (bistable). the solenoid valves are supplied complete with coil so that the tension has to be added to the solenoid valve code. B04 = coil 12V D.C. B05 = coil 24V D.C. B09 = coil 24V (2W) D.C. B56 = coil 24V 50/60 Hz A.C. B57 = coil 110V 50/60 Hz A.C. B58 = coil 220V 50/60 Hz A.C. Construction characteristics body spacer spacers Piston seals springs Operators Pistons spools technopolymer technopolymer nbr nbr Aisi 302 stainless steel technopolymer technopolymer Nickel - plated steel / Technopolymer Maximum fitting torque thread G 1/8" G1/4" Maximum torque (nm) 4 9 Use and maintenance this valves have an average life of 15 million cycles depending on the application and air quality. Filtered and lubricated air using specified lubricants will reduce the wear of the seals and ensures long and trouble free operation. Please ensure that the valve is being used according with the manufacturers specification, such as air pressure and temperature. the exhaust port of the distributor has to be protected in a dusty and dirty environment. repair kits including the spool complete with seals are available for overhauling the valves. However, although this is a simple operation it should be carried out by a competent person. ATTENTION: use hydraulic oil class H for lubrication such as MAGnA GC 32 (Castrol). Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 1 | 109 1 Air distributiOn The Valves and Solenoid valves G1/8" (T488) are: 5 ways function, pneumatically operated, single solenoid (monostable) mechanical or pneumatic spring return, spring or pneumatic return, with 2 coils (bistable) and in 5 ways 3 positions version with closed, open and pressured centres. the solenoid valves are supplied complete with coil (see series 300) so that the tension has to be added to the solenoid valve code: M9 = Coil 24 V D.C. (rating power 2 watt) M11 = Coil 24 V D.C. (rating power 3.8 watt) M56 = Coil 24 V 50/60 HZ (starting power 9 VA, rating power 6 VA ) M57 = Coil 110 V 50/60 HZ (starting power 9 VA, rating power 6 VA) M58 = Coil 220 V 50/60 HZ (starting power 9 VA, rating power 6 VA)
1106 Stránky | Platí do 06/2025 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.