PFERD Tools Main Catalogue Strana 95
Nabídka komerčních zákazníků **Nejlépe prodávané z PFERD
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
TC burrs PFERD cuts PFERD cuts for universal applications Cut 1 (C according to DIN 8033) ■ Machining of non-ferrous metals, steel and cast iron. ■ High stock removal. Cut 3 (MY according to DIN 8033) ■ Machining of steel, cast iron, stainless steel (INOX), nickel-based alloys and titanium alloys. ■ High stock removal. ■ Good surface. Cut 3 PLUS (MX according to DIN 8033) ■ Similar to the 3 cut, but with cross cut. ■ Machining of steel, cast iron, stainless steel (INOX), nickel-based alloys and titanium alloys. ■ High stock removal. ■ Burrs with the HICOAT coating HC-FEP achieve a much higher stock removal rate than uncoated burrs. Cut 4 (MX according to DIN 8033) ■ Machining of stainless steel (INOX), steel and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. ■ High stock removal with short chips. ■ Good surface. Cut 5 (F according to DIN 8033) ■ Fine machining of steel, cast iron, stainless steel (INOX) and high-temperatureresistant materials such as nickel-based and cobalt-based alloys. ■ Good surface. PFERD cuts for high-performance applications ALLROUND cut ■ High stock removal rate on key materials such as steel, cast steel, stainless steel (INOX), non-ferrous metals and cast iron. ■ Similar to the 3 PLUS cut but with a significantly higher stock removal rate. ■ Burrs with the HICOAT coating HC-FEP achieve a much higher stock removal rate than uncoated burrs. STEEL cut ■ Extremely high stock removal rate on steel and cast steel. ■ Smooth milling. ■ Reduced vibration and less noise. ■ Burrs with the HICOAT coating HC-FEP achieve a much higher stock removal rate than uncoated burrs. INOX cut ■ Extremely high stock removal rate on all austenitic, rust and acid-resistant steels, stainless steel (INOX) and soft titanium alloys (tensile strength < 500 N/mm²). ■ Significantly reduced vibration and less noise. ■ Burrs with the HICOAT coating HC-FEP achieve a much higher stock removal rate than uncoated burrs. ALU cut ■ High stock removal rate on aluminium and aluminium alloys, non-ferrous metals and plastics. ■ Smooth milling. ■ HICOAT coating HC-NFE for long-chipping and lubricating aluminium alloys and non-ferrous metals. NON-FERROUS cut ■ High stock removal rate on non-ferrous metals, brass, copper, plastics and fibrereinforced plastics. ■ Suitable for universal use. CAST cut ■ Extremely high stock removal rate on cast iron. ■ Smooth milling. ■ Reduced vibration and less noise. TITANIUM cut ■ Outstanding stock removal rate and tool life on hard titanium alloys. ■ Tangibly more aggressive, large chips and very good chip removal. ■ Reduced vibration and less noise. ■ For soft titanium alloys (tensile strength < 500 N/mm²), PFERD recommends the INOX cut. EDGE cut ■ Creates exact edge shapes – with either 30° or 45° chamfering or a defined radius of 3.0 mm. ■ Safe and comfortable to guide. Catalogue Page 2 7 2
724 Stránky | Platí do 12/2025 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.