PFERD Tools Main Catalogue Strana 684
Nabídka komerčních zákazníků **Produkty z katalogové stránky
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Robot spindles for stationary applications Angle grinder with threaded spindle 280 60± 0,1 PWA 11/120 RS Robot spindle manufactured according to the most stringent quality criteria and the latest technological standards with clockwise rotation and exhaust directed to the rear. Suitable for stationary applications in robot cells and machine tools and for installation in transfer lines. 98 127 Contents: 1 m exhaust hose and 2.5 m air supply hose with 1/2” male threaded connection, 1 clamping nut, 2 flange screws, 2 spacer sleeves, 2 keys (1x STL SW 35 x 5 mm, 1x SKS SW 4 mm), guard dia. 125 mm. 7 Oil /min Special features: ■ With maximum tool diameter up to 125 mm. ■ Autobalancer on the drive spindle and constant power delivery due to the centrifugal governor. ■ Spindle lock pin for tool change with one key. Rotational speed [RPM] Power output [watts] 12,000 1,100 Air consumption at idle [m3/min] 0.5 Air consumption under load [m3/min] 1 Spindle thread M14 Air supply hose internal dia. [mm] 13 Tool mount- Net weight ing [kg] [mm] 22.23 2.430 Item no. Designation 80115023 PWA 11/120 RS Robot spindles for flexible shafts – straight handpiece 105,5 HAQ 10 G28 RS 125 60-0,3 35 51,3 73 Max. rotational speed [RPM] 18,000 Straight handpiece for stationary applications. Can be connected to all flexible shafts with G28 sliding coupling. The maximum rotational speed is 18,000 RPM. Contents: 2 keys (DM SW 15/20mm). 5 Handpieceside coupling G / dia. [mm] 28 / 28 mm Special features: ■ Maximum flexibility thanks to the quickchange tool mounting. ■ Enables flexible shaft drives to be used as straight grinders in robot cells. Transmission ratio Net weight [kg] Item no. Designation 1:1 3.425 87101807 HAQ 10 G28 RS Robot spindles for flexible shafts – angle handpiece 160 G 28 60 98 65 240 9 Max. rotational speed [RPM] 18,000 14 | 9 Handpieceside coupling G / dia. [mm] 28 / 28 mm Catalogue WT 10 G28 RS Angle drive for stationary applications. Can be connected to all flexible shafts with G28 thread (instead of the handpiece). Connection to flexible shaft can be pivoted 360°. With M14 spindle thread and dia. 22.23 mm tool mounting. Contents: 1 clamping nut (item no. 98980036), 2 flange screws (1x item no. 98980037, 1x item no. 98980038), 2 spacer sleeves (1x item no. 98980039, 1x item no. 98980040), 2 keys (1x STL SW 35 x 5 mm, 1x SKS SW 4 mm), guard dia. 125 mm, anti-vibration handle. Special features: ■ Enables flexible shaft drives to be used as angle grinders in robot cells. ■ The connection to the shaft can be pivoted 360°. ■ With maximum tool diameter up to 125 mm. Transmission ratio Net weight [kg] Item no. Designation 1.53 : 1 1.788 87100989 WT 10 G28 RS New item
853 Stránky | Platí do 12/2026 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.