PFERD Tools Main Catalogue Strana 547
Nabídka komerčních zákazníků **Nejlépe prodávané z PFERD
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Cut-off wheels for stationary applications Safety notes Proper clamping of cut-off wheels ➁ The correct clamping of the cut-off wheel is a prerequisite for optimum performance and is essential to ensure user safety. The adjacent illustration shows the right way to do it: ① Machine spindle with high concentricity. ② Equally sized flanges. ③ Intermediate paper layers, if required for secure clamping and safe use. ➀ Our recommendations: ■ After every second wheel change, change the intermediate paper layers. ■ As from a wheel diameter > 400 mm, always use intermediate paper layers. ➂ Safety notes The safe use of PFERD tools depends largely on proper clamping systems. Both flanges between which a grinding tool is mounted must have the same outer diameter and same support area (according to EN 13218, ANSI B7.1). Correct Incorrect Transport and storage Transport and storage To avoid damage to the cut-off wheels through improper transport or adverse environmental influences during storage, e.g. UV radiation, temperature or humidity, please observe the following advice: ■ As far as possible, transport and store cut-off wheels in their original packaging lying on a flat surface, e.g. on a shelf or vertically in racks. ■ Avoid bending the tools. ■ Ensure that the cut-off wheels are stored in dry, frost-free rooms with consistent temperatures. ■ Use supplies in the order of their arrival. Advice on the storage of conical wheels (CT): Conical cut-off wheels must be stacked with intermediate paper layers, so that the tapered area is supported and bending of the cut-off wheels is avoided. PFERD supplies conical cut-off wheels with intermediate paper layers included. 7 D ➀ ① Intermediate paper layers Recommendation 22°C 18°C Room temperature: 18-22°C Relative humidity: 45-65% No direct sunlight Catalogue 7 Page 5
724 Stránky | Platí do 12/2025 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.