Pferd drilling and countersinking tools Strana 14
Nabídka komerčních zákazníků **Nejlépe prodávané z PFERD
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Countersink tools HSS conical countersinks Conical countersinks from PFERD are characterized by their particularly sharp blades that are able to achieve very good results, even at low cutting speeds. The various versions allow for countersinking and deburring when machining various types of materials, even in industrial environments. The UGT version denotes a conical countersink with unequal pitch. To ensure reliable torque transmission, conical countersinks have a three-surface shaft from a countersink diameter of 28 mm. Shape Advantages HSS countersinks 90° ■ Particularly well suited for producing countersinks for 90° screws. HSS countersinks 90° UGT ■ Particularly well suited to producing exact countersinks. ■ Smooth running. ■ Low countersinking force and a good surface quality. ■ Specially developed geometry with wide flutes for optimal chip removal and heat dissipation. ■ Especially well suited for robot and stationary applications. HSS countersinks 60° ■ Particularly well suited for countersinking and deburring. PFERD also offers conical countersinks with a premium HICOAT coating. Conical countersinks with a HICOAT coating provide good high-temperature hardness and resistance to oxidation. They can therefore also be used without the addition of coolants and on hard materials. Advantages: Recommendations for use: ■ High stock removal rate and optimum chip removal. ■ Burr-free results, even with low cutting speeds. ■ Long tool life. ■ High surface quality of the workpiece. ■ Select the appropriate type depending on the countersink angle required and the material to be machined. ■ Use cutting oil or compressed air as a coolant/lubricant. ■ Please refer to the table for the recommended rotational speeds. Materials that can be worked: ■ Steel ■ Cast steel ■ Stainless steel (INOX) ■ Non-ferrous metals ■ Cast iron ■ Plastics ■ Other materials Matching tool drives: ■ Power drills ■ Column drills ■ Machine tools ■ Robot Safety note: Applications: ■ Chamfering ■ Deburring ■ Countersinking HSS type ■ HSS countersink that is suitable for universal use on almost all materials. d2 To ensure reliable torque transmission, conical countersinks have a three-surface shaft from a countersink diameter of 28 mm. HSS E Co5 (M35) type HSS HICOAT HC-FEP type ■ HSS countersink that is suitable for universal use on almost all materials. ■ Long tool life. ■ Very good temperature resistance due to Co content. ■ HSS countersink that is suitable for universal use on almost all materials. ■ Very long tool life thanks to premium HICOAT coating. ■ Can also be used without coolants and lubricants. 14
26 Stránky | Platí do 12/2025 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.