Metabo - Accessories Strana 55
Nabídka komerčních zákazníků **Produkty z katalogové stránky
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Hammer drill bits and chisel bits Hammer drill bits and chisel bits Order no. more accessories Order no. Connector With thread 1/2"-20 UNF. Extraction head set, 2 pieces for ISA 18 LTX Original suction head for highest suction performance with the ISA 18 LTX 623767000 HEPA FIlter for ISA 18 LTX 623768000 630928000* Holder: SDS-plus, 1/2"- 20 UNF HEPA filter for highest health protection Connector Keeps back 99.995% of fine dusts larger than 0.3 µm 631285000* With 1/2"-20 UNF thread for chuck and hexagon recess 1/4" (6.35 mm) for screwdriver bits 01 with bit retaining bush Holder: SDS-plus, 1/2"- 20 UNF Bit retaining bush for connector 631285000 For fitting bits and sockets with 1/4" (6.35 mm) hexagon in the spindle of drills and impact drills with spindle thread 1/2"-20 UNF and hexagon recess 1/4" (6.35 mm). Also suitable for connectors 630928000 and 631285000. 631281000* Connector 623371000* Special grease For shank ends of hammer drill bits, chisels, adapters etc.; prevents friction and wear coefficient; bio-degradable 631800000 02 High durability, high resistance to heat, high anti-corrosion properties Metabo VibraTech (MVT) side handle Suitable for UHE 28 Plus, KHE 28 Plus 631595000 Connector from SDS-max to SDS-plus to enable use of SDS-plus drill bits/chisels Holder: 03 SDS-max, SDS-plus Connector Connector with ratio female thread and SDS-max shank end, length 195 mm, for the arbor 623299000 of concrete core bits and for mounting core bits with the help of the pilot drill 623038000 623370000* 04 Holder: SDS-max, ratio female thread Extraction set ESA for SDS-max hammers 623271000 For drilling and chiselling - with different attachments drill bits from Ø 16-52 mm, pointed and 05 flat chisel up to 25 mm Tool-free installation - drill bit and chisel can be removed without detaching the extraction system Compatible with all new Metabo SDS-max hammers in connection with all Metabo M- and H-vacuum cleaners NEW 06 External dust extraction Drill bit-Ø: 16 - 52 mm ESA plus extraction set for all Metabo SDS-plus hammers 623770000* 07 For drilling Ø 5-32 mm Flexible 360° dust cap, adjustment to 160 mm and 210 mm drill bit Compatible with all new Metabo SDS-plus hammers in connection with all Metabo M- and H-vacuum cleaners NEW 08 External dust extraction Drill-Ø: 5 - 32 mm Vacuum cleaner adapter DDE 14 630829000* 09 Vacuum cleaner adapter for extracting drilling dust at the hole entry point Safe and dust-free drilling in walls and ceilings By virtue of the 2-chamber system and the foam rubber gasket it stays attached to almost all (even uneven) surfaces, such as plaster, natural stone and woodchip wallpaper. Minimal drill dust residue at walls and wallpapers. 10 The adapter is put on the existing suction hose. The negative pressure of the vacuum cleaner keeps the adapter to the respective subsurface. 11 Drill Ø: 4 - 14 mm Vacuum cleaner adapter DDE 72 Features see above Drill Ø: 72 mm 631343000* ISA 18 LTX 24 Integrated Dust Extraction 631341840 12 Extremely light and compact dust extraction for dust-free drilling in concrete, stone and masonry Simple, tool-free installation to the cordless hammer KHA 18 LTX BL 24 Quick 13 Ideal for working overhead or in areas sensible to dust Health-friendly working with HEPA filter for smallest dust particles Precise setting for different drilling depths and drill bit lengths Tool-free replaceable suction head with low-wear brushes 14 3 Second delay to extract the remaining dust from the drill hole Transparent collection container can be emptied easily, e.g. for 160 bores Ø 6 / 40 mm 100% Drilling performance with active dust extraction thanks to being driven by own motor 15 Drill bit-Ø: 5 - 16 mm Max. drill bit length: 160 mm Rated input power: 65 W Weight: 1.1 kg Scope of delivery: replacement extraction head, Metaloc II ISA 18 LTX 24 Integrated Dust Extraction Scope of delivery: replacement extraction head 16 631341890 *Self-service packaging | 108 109 |
157 Stránky | Platí do 04/2023 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.