JEPSON Power Catalog Strana 11
Nabídka komerčních zákazníků **Nejlépe prodávané z Jepson Power
THROW AWAY CARBIDE TIPPED SAW BLADES FOR SOLID MATERIALS AND THICK WALLED TUBES RANGE OF SAWBLADES Ø [mm] Kerf HIGHER CUTTING SPEED - HIGHER DURABILITY - EXCELLENT CUTTING SURFACE Application: • steel • stainless steel • non-ferrous steel • cast iron TA-TCT saw blades are designed for mass cutting of automobile parts and forged materials which requires severe cutting controls of section. • Saw blade diameter from 250 mm up to 460 mm • Saw blade revolution from 12 - 200 rpm • Special sizes on request • Customized center and pin holes Carbide teeth: Suitable for stainless steel Application by examples: • Hinges • Gear wheels • Cylinder barrels • Forgings • Ball bearings • Bevel wheel • Iron and steel trade Advantages: • Up to 15.000 cuts • higher cutting life • better cutting surface • higher cutting speed Cermet teeth: For use in steel, non-ferrous material and cast iron for higher durability and tempered steel. By default, all saw blades are in un-coated. Coating on request! To be used mainly for constant length cutting of round solid bar, square solid bar, solid-drawn pipe and so on. Our saw blades are produced under strict quality control regarding cutting surface, precision and any other aspects. Teeth WHICH SPEED FOR WHICH MATERIAL? Cutting capacity 54 250 Selecting the right saw blade is the essential first step for an efficient mass production. Bore [mm] 285 350 360 425 460 2.0 2.0 32 32/40 2.7 2.6 50 40/50 2.7 2.7 50 50 Material DIN Cutting speed Feed speed/tooth St 33 140 (120 - 140) for pipes: 200 0.05 (0.04-0.08) Ø 40 ~ Ø 50 60 Ø 30 ~ Ø 40 72 Ø 15 ~ Ø 30 CK 10 C10 140 (120 - 140) 0.05 (0.04-0.08) 160 Ø 1.2 ~ Ø 3.5 (wt) CK15 C15 140 (120 - 140) 0.05 (0.04-0.08) 60 Ø 45 ~ Ø 75 CK25 C25 140 (120 - 140) 0.05 (0.04-0.08) CK50 C35 130 (120 - 140) 0.05 (0.04-0.07) CK40 C40 130 (120 - 140) 0.05 (0.04-0.07) CK45 C45 130 (120 - 140) 0.05 (0.04-0.07) 100 (100 - 120) 0.05 (0.04-0.07) 100 (100 - 120) 0.05 (0.04-0.07) 100 (100 - 120) 0.05 (0.04-0.07) 72 Ø 30 ~ Ø 45 80 Ø 25 ~ Ø 40 120 Ø 15 ~ Ø 30 180 Ø 1.2 ~ Ø 3.5 (wt) 200 Ø 1.2 ~ Ø 3.5 (wt) 120 Ø 30 ~ Ø 50 CK50 C50 CK55 C55 CK60 C60 140 Ø 15 ~ Ø 30 37Cr 4 60 Ø 65 ~ Ø 100 41Cr 4 80 34CrMo 4 42CrMo 4 100Cr 6 Ø 30 ~ Ø 65 100 Ø 10 ~ Ø 30 60 Ø 50 ~ Ø 110 X 210 Cr 12 90 0.05 (0.04-0.06) 80 Ø 35 ~ Ø 80 5CrnNi 100 0.05 (0.04-0.06) 100 Ø 30 ~ Ø 65 1810 100 0.05 (0.04-0.06) 120 Ø 20 ~ Ø 40 60 Ø 65 ~ Ø 120 80 Ø 50 ~ Ø 80 100 Ø 40 ~ Ø 60 wt = wall thickness WHICH MACHINE DOES MY SAW BLADE FIT? Machine Model Adige CM502-CM601 Amada Kerf Bore [mm] 14“/360 2,6 | 2,27 32 Pin holes 11“/285 2,0 | 1,75 40 2/12/80 CM100AN 14“/360 2,6 | 2,27 40 4/12/90 HCS 70 HCS 90 HCS 130 HCS 150 WAC7 SPEED C9 Kerf Bore [mm] 10“/250 2,0 | 1,70 32 Pin holes 4/9/50+4/11/63 11“/285 2,0 | 1,70 32 4/9/50+4/11/63 10“/250 2,0 | 1,70 32 4/9/50+4/11/63 11“/285 2,0 | 1,70 32 4/9/50+4/11/63 12½“/315 2,5 | 2,25 32 4/9/50+4/11/63 14“/360 2,6 | 2,27 50 4/15/80 17“/425 2,7 | 2,27 50 4/15/80 17“/425 2,7 | 2,27 50 4/15/80 18“/460 2,7 | 2,27 50 4/15/80 CS 65 11“/285 2,0 | 1,75 40 4/12/90 CS 100 14“/360 2,6 | 2,27 40 4/12/90 2,7 | 2,27 50 4/12/90 2,0 | 1,70 32 4/11/63 2,7 | 2,27 40 4/12/90 2,0 | 1,75 40 2/15/80 11“/285 2,0 | 1,75 40 2/15/80 11“/285 2,0 | 1,75 40 2/15/80 14“/360 2,6 | 2,27 40 2/15/80 14“/360 2,6 | 2,27 40 2/15/80 16½“/420 2,7 | 2,27 40 2/15/80 14“/360 2,6 | 2,27 40 2/15/80 16½“/420 2,7 | 2,27 40 2/15/80 CS 150 18“/460 18“/460 2,7 | 2,27 40 2/15/80 NHC 050 NA 10“/250 NHC 070 NA 11“/285 2,0 | 1,70 32 4/11/63 NHC 100 NA 14“/360 2,6 | 2,27 50 4/16/80 10“/250 2,0 | 1,75 40 4/12/64 Exact-cut Mac 60 10“/250 2,0 | 1,75 32 4/9/50 12½“/315 2,2 | 1,90 40 4/15/80 Ficep S35 S50 14“/360 2,6 | 2,27 40 2/15/80 18“/460 2,7 | 2,27 50 2/18/100 14“/350 2,6 | 2,27 40 4/14/80 14“/350 2,6 | 2,27 40 4/14/80 18“/460 2,7 | 2,27 50 4/18/100 19½“/500 3,4 | 2,80 50 4/18/100 14“/360 2,6 | 2,27 50 4/15/80 Kasto VARIOSPEED C14 VARIOSPEED C15 Mega NishijmaSimax NHC 150 NA Rattunde ACS 90/2 ACS 102 18“/460 2,7 | 2,27 50 4/21/90 14“/350 16“/400 2,6 | 2,30 50 4/15/80 11“/285 2,0 | 1,70 40 4/12/64 2,2 | 1,90 40 4/12/64 RSA RASACUT 12½“/315 17“/425 2,7 | 2,27 40 4/12/64 Sinico TOP 2000 14“/360 14“/370 2,6 | 2,30 50 4/15/80 TK5C 50 GL 10“/250 2,0 | 1,70 32 4/11/63 TK5C 70GL 11“/285 2,0 | 1,70 32 4/11/63 TK5C 101GL 14“/360 2,6 | 2,30 50 4/11/63 Tsune 20 Ø [in/mm] 18“/460 ECH 108 SIC 350 K SIC 500 K KMR 100 Model 10“/250 Bewo Gernetti Kaltenbach Machine 4/11/63 CM75AN CM150AN Behringer Eisele Ø [in/mm] DRYTECH® SAW BLADES 21
43 Stránky | Platí do 12/2024 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.