HEWI Catalog Hardware Strana 271
Nabídka komerčních zákazníků **Nejlépe prodávané z HEWI
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
EN 1125 | Technical information NOTES ON EN 1125 Panic door devices with horizontal bar for doors in escape routes EN 1125 General information Not only the relevant panic bars/touch bars are required for functioning certified panic door devices, but also a lock with strike! Depending on the type, the standard differentiates between single leaf and double doorset (two leaf) emergency exit devices, so that other components also belong to the emergency exit device. In the event of an emergency, the emergency exit device should enable the fastest possible evacuation of the room through the emergency exit door. Regardless of whether the door is locked or only the latch closes the door. The emergency exit door must be able to be opened using the panic bar even if a compressive force of 1000 N is applied to the door. The release force on the panic bar may not exceed 220 N. This and other requirements are documented in EN 1125, e.g. durability, fire protection, resistance to abuse, etc. The panic door devices must be tested and certified to this standard. A CE marking on the product ensures that only tested panic door devices conforming to the standard are installed. The standard is applied to emergency exits at which panic situations can occur. The people in the building are not familiar with the exits and their fittings. Technical information zertifiziert sein. Locking plate for panic bar fixing Locking plates consist of a doorplate (1) and a lever handle with backplate 219... (2) for screw fixing the panic bar 1 2 HEWI Hardware | 269
450 Stránky | Platí do 12/2024 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.
