HAAS - CATALOG 7.5 Strana 275
Nabídka komerčních zákazníků **Nejlépe prodávané z Otto Haas
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
DID YOU KNOW... ... that we have developed our product range with hoses especially for the sanitary and heating requirements? i.e. we have deliberately aside from from offering you so-called "home improvement qualities". You can of course also use our water hoses for garden irrigation. Guidelines for the intended use for hoses. In order to ensure an unproblematic and at any time trouble-free stakes of our product range tubing, please observe the following instructions. 1. Hose connections are designed for temporary use and must not take over a permanent installation function. 2. Hoses must always be tension-free, tight bending radius and kinks must be avoided as well as tensile loads. 3. Hoses are not to be subjected to mechanical stress, e.g. by complaining about objects. 4. Hoses must be installed in such a way that rolling over with a vehicle tire is not possible. 5. Tubes are conceive for static loads, a dynamic load such as frequent movement must be checked and released beforehand. 6. Check hoses regularly for external damage and keep pressureless by unattended. For inspection, hoses has to be always free accessible . 7. Hoses has to be always be used within the specific, physical and chemical conditions. 8. Inlet and outlet for washing machines and dishwashers as well as applications of the same type has to be replaced at the latest after 6 years. 9. In case of doubt and special installation conditions, therefore, the user's own trys are essential. 10. A proper storage and handling is necessary in order to achieve the greatest possible service life and long serviceability of hoses. Please make sure that hoses will be not pressed or kink and protected against sun and / or UV radiation. 11. Hoses must generally to be used according to the specified specification. If however use the hoses in other way e.g. supply hose for washing machines to other machines we wont give any warranty. 12. All permanently mounted hoses, such as inlet and outlet hoses, must be checked for leaks after installation. The leak test is to be repeated at regular intervals of three months. We kindly ask you to observe these instructions in order to ensure a problem-free use of our products at all times. Illustrations, dimensions and descriptions are not binding. We reserve the right to make technical changes!
373 Stránky | Platí do 12/2024 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.