Gedore Specialty tools catalogue Strana 32
Nabídka komerčních zákazníků **Nejlépe prodávané z GEDORE
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
2. Axle Repair 2.2 Support Joints, Bearings and Bushings KL-0250-40 5 pcs. (Code 1754483) KL-0250-40 Extractor for Clamping Bolt and Ball Joint, Audi A4/VW Passat Suitable for Audi A4 (until 2000)/VW Passat front axle (until 2005). Designed to remove the upper wishbone pivot pin from the steering knuckle clamping bore. Alternative tool: VAS 6085 For the quick and professional extraction of the hex clamping bolt and pivot pins, especially when components are corroded/seized in place. The tool is suitable for both right-hand and left-hand wheel suspensions. Not only would the technique using hammer, welding torch, angle grinder and drift be time-consuming and arduous, there would also be a risk of damaging steering knuckles, pivot pins and wishbone struts. Advantages: • High cost savings. • Substantial time savings of approximately 2-3 hours. • No risk of damage to suspension components. Technical Data: Weight: 2.4kg Scope of Delivery: KL-0250-40 Extractor for Clamping Bolt and Ball Joint Part No. KL-0250-4001 KL-0250-4002 KL-0250-4005 KL-0250-4011 KL-0250-4012 KL-0250-4013 KL-0250-4014 KL-0250-4015 KL-0250-43 KA 14 pcs. Description Tool Body Thread Adaptor (with large bore) Pressure Screw, M10x1.25x95 mm Housing Pressure Drift I (Length 78 mm) Nut Pressure Drift II (Length 98 mm) Pressure Drift III (Length 118 mm) Qty 1 1 1 1 1 1 1 1 (Code 3244253) KL-0250-43 KA Drill-Out Tool Kit for Strut Bolts, in a Plastic Storage Case, VW-Audi Applicable to VW-Audi, SEAT and ŠKODA vehicles with multi-link suspension. For example: VW Passat (3B), Phaeton (3D); Audi A4 (8E, 8H, 8K); A5 (8T, 8F); A6 (4B, 4G, 4F); Q5 (8R), A7 (4GA, 4GF), A8 (4D); SEAT Exeo (3R2, 3R5) and ŠKODA Superb (3U). For the professional pilot drilling/drilling out of seized/stuck strut clamping bolts having a 16mm waf size on multi-link suspensions. Necessary when changing the upper/lower control arm as well as the track rod end. This tool kit eliminates the need for the cost-intensive replacement of the complete steering knuckle with wheel bearing unit. In order to prevent damage to the mudguard on vehicles with low-mount steering gear, the steering knuckle needs to be locked in fully turned position by means of the clamping device that comes with the kit. Scope of Delivery: KL-0250-43 KA Drill-Out Tool Kit for Strut Bolts, in a Plastic Storage Case Part No. KL-0250-4311 A KL-0250-4313 KL-0250-4314 KL-0250-4321 A KL-0250-4322 KL-0250-4323 KL-0250-4324 KL-0250-433 KL-0250-4341 119-175 42 3 KL-0250-4390 32 Copyright GEDORE Automotive GmbH, Germany Description Base Tool Drill Sleeve, Ø 7mm Drill Sleeve with recess, Ø 7mm Extension, with Grub Screws Twist Drill, Ø 9.5x175x250mm, with clamping surface Twist Drill, Ø 7x155x225mm, with clamping surface Countersink, Ø 12.4mm Clamping Device Supplement, Track Rod End Drift, 6mm Hex Socket Key, 3mm Plastic Storage Case Qty 1 1 1 1 1 1 1 1 1 1 1 1
216 Stránky | Platí do 12/2024 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.
