Gedore Specialty tools catalogue Strana 13
Nabídka komerčních zákazníků **Nejlépe prodávané z GEDORE
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
(Code 2909499) KL-9002 SP E Spring Compressor, in a Foam Insert KL-9002 SP E 9 pcs. Universally suitable for vehicles equipped with MacPherson Suspension/ Damper Struts. Ideal for All-Wheel-Drive vehicles, Transporters and Vans such as Citroën Jumper; Fiat Ducato; Mercedes Vito, V-Class, M-Class, W210 4Matic; Peugeot Boxer, Break; Renault Master etc. Alternative tools: W 203 589 01 31 00, 31 3 340, VAS 6046 The use of special jaws will also enable coil springs mounted to wishbone suspensions to be removed and installed if space conditions allow. Comes with pairs of jaws with protective inserts in size 1 and 2 designed for spring diameters of from 85 (inside) - 170 (outside) mm. Additional jaws for spring Ø of 60 (inside) - 205 (outside) mm are available as accessories.accessories. Max. Load Capacity 27,500N * * at the specified 4-times Safety Factor, the maximum load capacity of the spring compressor is 27,500 N! The unique universal spring compressor • which, due to a special latching system, allows the span (distance between jaws) to be adjusted from a minimum distance of 40mm to a maximum distance of 361mm. This is an important feature when it comes to compressing very short springs (2-3 coils) but also very long springs so as to allow all these to be fully decompressed and/or replaced. (e.g.on Audi, BMW, Fiat, Ford, Lancia, Mazda, Mercedes, Renault etc.); • which features a patented Bayonet Interlock System with an automatic selflocking mechanism designed to safely fix the forged jaws to the compressor body (no tools, bolts or locking rings required); • whose spindle drive remains closed if the safety pin shears off. Thanks to the auxiliary drive, the compressed spring can then be decompressed to enable a new safety pin to be installed; • which is equipped with an automatic freewheel designed to prevent the spindle from overload during the decompression process once the maximum end of travel has been reached - thus eliminating the risk of damage to the spring compressor; • which enables the plastic protective inserts protecting the coating of the spring to be screw-connected to the jaws. This is very important to prevent spring failure/ breakage caused by notches and corrosion; • which is suitable for almost any MacPherson suspension/damper strut systems, as well as for many other wishbone suspensions - thanks to a wide range of jaws available. Thanks to the interaction of special high-precision components and the use of wearresistant nitrided steel, the compressor body not only is smooth-running but also highly resistant to wear and tear. To compress a spring having a coil-bound force of approx. 18,000N (for example of a Mercedes M-Class) a torque of only 35Nm is required. Recommended Accessory: KL-4999-1395 Plastic Storage Case Technical Data: Base body L min. L max. A SPF S min. I S min. II S max. I S max. II Minimum overall length Maximum overall length Working Travel (piston stroke) Spindle freewheel at Minimum span (I) (distance between jaws) Minimum span (II) (distance between jaws) Maximum span (I) (distance between jaws) Maximum span (II) (distance between jaws) Maximum load capacity (at 4-times safety factor) Breaking point Spindle drive Weight of compressor base body Weight of compressor base body with jaws size 1 and 2 475mm 715mm 305mm 735mm 40mm 72mm 328mm 361mm 27,500N 110,000N 24mm waf 6.9kg 13.4kg Scope of Delivery: KL-9002 SP E Spring Compressor, in a Foam Insert Part No. KL-9002-100 KL-9001-11 SP KL-9001-12 SP KL-4999-1322 Description Compressor Base Body Pair of Jaws in size 1, with Protective Inserts Pair of Jaws in size 2, with Protective Inserts Foam Insert KL-9002 Spring Compressor Like the KL-9002 SP, however, supplied without plastic protective inserts Copyright GEDORE Automotive GmbH, Germany Qty 1 1 1 1 Advantages: • Jaw-mounting device with automatic self-locking mechanism. • Adjustable jaw-opening device. • Drive features an additional auxiliary drive. • Automatic free-wheel of the spindle. • Also suitable for use on conical springs. • Comes with plastic protective inserts. Note: For the storage of the foam insert in the Modulo Workstation, the KL-4999-1325 drawer insert adaptor will be needed. Note: Additional jaws for springs with a Ø of from 60 (inside) to 205 (outside) mm are available as accessories. 13
216 Stránky | Platí do 12/2024 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.