GAH ALBERTS - Hardware Profile and Sheets Strana 44
Nabídka komerčních zákazníků **Produkty z katalogové stránky
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
DECLARATION OF PERFORMANCE Number: GAH/LE-005 as required by (EU) regulation 305/2011 - Nr. GAH 6008 1. ETA 08/0170 GAH Rafter purlin anchors 2. Type: 8646/ 8647 170 right/left, 8648/ 8649 210 right/left 8650/ 8651 250, 290, 330, 370 right/left The rafter purlin anchors are labelled with the manufacturer‘s trade mark, CE marking and the number issued by the Karlsruhe Institute of Technology. All other information, such as the date of manufacture, is specified on the packaging label. 3. Rafter purlin anchors are designed for joining load-bearing wooden components, e.g., for joining a timber beam and a purlin. 4. Gust. Alberts GmbH & Co. KG Blumenthal 2 58849 Herscheid 5. N/A 6. System for assessing constancy of performance: 2+ 7. N/A 8. The Karlsruhe Institute of Technology (KIT), NB no. 0769, performed an initial inspection of the plant and factory production control as an well as ongoing monitoring, assessment and evaluation of factory production control in accordance with system 2+ and issued the following document: Certificate of conformity for factory production control, no. 0769-CPD-6008. 9. Declared performance Performance See Annex B of ETA 08/0170 Stiffness No performance determined Ductility No performance determined Safety in the event of a fire Fire performance The rafter purlin anchors are made of steel, classified as Euroclass A1 in accordance with EN 1350-1 Hygiene, health and environmental protection No hazardous substances contained Durability and fitness for purpose The durability and fitness for purpose of the rafter purlin anchors was assessed as satisfactory, provided they are used in timber constructions with the wood types described in Eurocode 5, and meet the requirements of service classes 1, 2 and service class 3 for stainless steel. Identification See appendix A of ETA 08/0170 Standardised technical specification EN 1350-1 ETA 08/0170 ETAG 015 three-dimensional spike plates Essential characteristics Characteristic load-bearing capacity 10. The product performance as per numbers 1 and 2 corresponds to the declared performance as per number 9. The manufacturer as stated in number 4 is solely responsible for the issuing of this declaration of performance in compliance with the Regulation (EU) No. 305/2011. Signed for and in the name of the manufacturer by: Peter Feldmann Head of Quality Management Name Role Herscheid 22. May 2018 i.A. Location and date of issue Signature 45
361 Stránky | Platí do 12/2024 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.