fischer fixing-systems main-catalogue Strana 78
Nabídka komerčních zákazníků **Nejlépe prodávané z Fischer
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Resin anchor RM II · Chemical fixings Loads Resin capsule RM II with threaded rod RG M Permissible loads of a single anchor¹) ²) in normal concrete of strength class C20/25. For the design the complete current assessment ETA-16/0340 has to be considered. Material/ surface³) RG M 8 RG M 10 RG M 12 RG M 16 RG M 20 RG M 24 Minimum member thickness Maximum installationtorque Non-cracked concrete Permissible tension (Nperm) and shear loads (Vperm); minimum spacing (smin) and edge distances (cmin) with reduced loads Permissible tension (Nperm) and shear loads (Vperm); minimum spacing (smin) and edge distances (cmin) with reduced loads hef hmin Tinst,max Nperm4) Vperm4) smin4) cmin4) Nperm4) Vperm4) smin4) cmin4) [mm] [mm] [Nm] [kN] [kN] [mm] [mm] [kN] [kN] [mm] [mm] 5.8 80 110 10 - - - - 9.0 6.3 40 40 R-70 80 110 10 - - - - 9.6 6.0 40 40 5.8 90 120 20 4.5 9.7 45 45 13.5 9.7 45 45 R-70 90 120 20 4.5 9.2 45 45 13.5 9.2 45 45 5.8 110 140 40 6.6 14.3 55 55 19.7 14.3 55 55 R-70 110 140 40 6.6 13.7 55 55 19.7 13.7 55 55 5.8 125 170 60 10.0 23.9 65 65 27.3 26.9 65 65 R-70 125 170 60 10.0 23.9 65 65 27.3 25.2 65 65 5.8 170 220 120 17.0 40.7 85 85 43.3 42.3 85 85 R-70 170 220 120 17.0 39.4 85 85 43.3 39.4 85 85 5.8 210 270 150 25.1 60.3 105 105 59.4 60.6 105 105 R-70 210 270 150 25.1 56.8 105 105 59.4 56.8 105 105 Type 3 Effective anchorage depth Cracked concrete ¹) Design according to EN 1992-4:2018 (for static resp. quasi-static loads). The partial safety factors for material resistance as regulated in the ETA as well as a partial safety factor for load actions of γL = 1.4 are considered. As a single anchor counts e.g. an anchor with a spacing s ≥ 3 x hef and an edge distance c ≥ 1.5 x hef. Accurate data see ETA. ²) The specified loads are valid for anchorages in dry and damp concrete. For temperatures in the anchoring substrate up to 50 °C (resp. short term up to 80 °C). Drill hole cleaning as per specification in the ETA. The factor Ψsus for sustained load was taken into account with 1.0. ³) Further steel grades, versions and technical data see ETA, e.g. for dry internal conditions, galvanised steel (gvz); for damp interiors and for outdoor use, stainless steel (R). 4) In the case of combinations of tension and shear loads, bending moments with reduced or minimum spacing and edge distances (anchor groups), the design must be carried out in accordance with the provisions of the complete ETA and the provisions of the EN 1992-4:2018. We recommend using our anchor design software C-FIX. Loads Resin capsule RM II with internal threaded anchor RG M I Permissible loads of a single anchor¹) ²) in normal concrete of strength class C20/25. For the design the complete current assessment ETA-16/0340 has to be considered. Screw material³) RG M10 I RG M12 I RG M16 I RG M20 I Minimum member thickness Maximum installationtorque Non-cracked concrete Permissible tension (Nperm) and shear loads (Vperm); minimum spacing (smin) and edge distances (cmin) with reduced loads Permissible tension (Nperm) and shear loads (Vperm); minimum spacing (smin) and edge distances (cmin) with reduced loads hef hmin Tinst,max Nperm4) Vperm4) smin4) cmin4) Nperm4) Vperm4) smin4) cmin4) [mm] [mm] [Nm] [kN] [kN] [mm] [mm] [kN] [kN] [mm] [mm] 5.8 90 120 10 5.4 5.3 55 55 9.0 5.3 55 55 8.8 90 120 10 5.4 8.3 55 55 13.8 8.3 55 55 R-70 90 120 10 5.4 5.9 55 55 9.9 5.9 55 55 5.8 90 130 20 7.2 8.3 65 65 13.8 8.3 65 65 8.8 90 130 20 7.2 13.3 65 65 16.7 13.3 65 65 R-70 90 130 20 7.2 9.3 65 65 15.7 9.3 65 65 5.8 125 170 40 11.2 12.1 75 75 20.5 12.1 75 75 8.8 125 170 40 11.2 19.3 75 75 27.3 19.3 75 75 R-70 125 170 40 11.2 13.5 75 75 22.5 13.5 75 75 5.8 160 210 80 17.6 22.4 95 95 37.6 22.4 95 95 8.8 160 210 80 17.6 30.9 95 95 39.5 30.9 95 95 R-70 160 210 80 17.6 25.1 95 95 39.5 25.1 95 95 5.8 200 260 120 27.9 35.4 125 125 55.2 35.4 125 125 8.8 200 260 120 27.9 51.4 125 125 55.2 51.4 125 125 R-70 200 260 120 27.9 39.4 125 125 55.2 39.4 125 125 Type RG M8 I Effective anchorage depth Cracked concrete ¹) Design according to EN 1992-4:2018 (for static resp. quasi-static loads). The partial safety factors for material resistance as regulated in the ETA as well as a partial safety factor for load actions of γL = 1.4 are considered. As a single anchor counts e.g. an anchor with a spacing s ≥ 3 x hef and an edge distance c ≥ 1.5 x hef. Accurate data see ETA. ²) The specified loads are valid for anchorages in dry and damp concrete. For temperatures in the anchoring substrate up to 50 °C (resp. short term up to 80 °C). Drill hole cleaning as per specification in the ETA. The factor Ψsus for sustained load was taken into account with 1.0. ³) Further steel grades, versions and technical data see ETA, e.g. for dry internal conditions, galvanised steel (gvz); for damp interiors and for outdoor use, stainless steel (R). 4) In the case of combinations of tension and shear loads, bending moments with reduced or minimum spacing and edge distances (anchor groups), the design must be carried out in accordance with the provisions of the complete ETA and the provisions of the EN 1992-4:2018. We recommend using our anchor design software C-FIX. 78
684 Stránky | Platí do 12/2025 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.