fischer fixing-systems main-catalogue Strana 67
Nabídka komerčních zákazníků **Nejlépe prodávané z Fischer
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Superbond system FSB · Chemical fixings Superbond system FSB The concrete all-rounder 3 Bridges for traffic signs Steel girders Applications Advantages · · · · · · · · · · · The Superbond system is a combined capsule and injection system for cracked and non-cracked concrete. The injection mortar FIS SB and resin capsule RSB perform the same as each other at the same anchorage depth. This gives the installer maximum flexibility. · Variable anchorage depths from 4 x ds to 20 x ds enable ideal adaptation to the load to be applied, and thus ensure an optimised installation time and use of materials. · Maximum application temperatures of up to +150 °C open up new areas of use for bonded anchors. · Superbond is even approved for installation at frosty temperatures of -30 °C. · The approval-compliant use for seismic applications (performance category C1, C2) as well as in waterfilled and diamond drill holes ensures safety even in extreme conditions. Building materials Functioning Approved for anchorings in: · Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: · Natural stone with dense structure · Superbond is a bonded anchor system based on a vinyl ester hybrid with silane technology. · The threaded rod FIS A can only be set with injection mortar FIS SB (Standard and HIGH SPEED); the threaded rod RG M with oblique edge can be optionally set with injection mortar FIS SB (Standard and HIGH SPEED) or resin capsule RSB. · Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the injection cartridge in the static mixer or destruction of the capsule during the setting procedure. · The mortar bonds the entire surface of the fastening element with the drill hole wall and seals the drill hole. Heavy steel constructions Silo installations Tall shelving Sound barriers Guard rails Staircases Reinforcing steel (only FIS SB) Overhead installations Water-filled drill holes Diamond drilled holes Certificates ETA-12/0258, for cracked concrete ETA-13/0651, for post-installed rebar connection ETA-19/0501, for concrete under fatigue cyclic loading Fire resistance classification R120 For use with Anchors & sleeves page 126 Dispenser page 189 Accessories page 194 67
684 Stránky | Platí do 12/2025 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.