fischer facade systems catalogue Strana 104
Nabídka komerčních zákazníků **Nejlépe prodávané z Fischer
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Basics · undercut anchors Basic knowledge undercut anchors The secret of the concealed fixing solution. The fischer façade system opens up the way for the design of advanced, complex façades - and all this in an easy and economic way. The reason lies in the system itself - FZP II, the fischer zykon panel anchor, which is an undercut anchor and therefore stress-free fixing 6 undercut drill hole without external forces system that is installed into pre-drilled undercut holes. Internal reaction forces between anchor and material result not before the impact of external forces. with external forces Undercut hole and behaviour of the Zykon panel anchor FZP II with and without external force The undercut anchors are installed on the back of the panel, not visible from the front side of the façade and cause a clean joint pattern. This also requires the possibility of optimized positioning of the anchor. As a result, the bending strength in the panel is reduced by approximately 50% compared to common systems. Compared to common fixings, this technology provides a multiple load capacity, allows lower panel thicknesses and larger panel formats due to lower panel bending moments. Materials such as natural stone, ceramics, artificial stone, HPL, fibre cement, solid surface panels and also glass (ESG = toughened safety glass and VSG = laminated safety glass) can be fixed with the fischer FZP II undercut anchors in combination with the fischer subframe systems, providing architects with a wide range of scope of design. 104 Optimization of the bending moment of the façade panel; left diagram shows clamp or pin fixing, right diagram shows undercut fixing The perfectly matching fischer façade systems with the undercut anchors, fitting subframe and advanced drilling technology pays off on the construction site: Installation is simple, fast and independent of the weather. The construction time is shortened - and therefore the costs are also reduced.
122 Stránky | Platí do 12/2025 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.