fischer ETICS-Fixings EWI catalogue Strana 21
Nabídka komerčních zákazníků **Nejlépe prodávané z Fischer
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Screw fixings termoz CS 8 The economic screw fixing for all ETICS insulation materials Countersunk installation Polystyrene rigid foam boards O35 on perforated sand-lime brick BUILDING MATERIALS APPROVALS ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ 3 18 Building material classes A, B, C, D, E Concrete Concrete (weather shell) Building brick Solid sand-lime brick Hollow blocks made from lightweight concrete Vertically perforated brick Perforated sand-lime brick Lightweight aggregate concrete Aerated concrete ADVANTAGES APPLICATIONS FUNCTIONING ▪ Compound screw minimises the thermal bridge, thus there are no fixing marks on the façade. ▪ Recessed installation with round cap provides a smooth surface for thinner render layer. ▪ Less drill wear and drill time due to minimum installation depth of 35 mm in the substrate. ▪ With flush installation, the disc tapers to a very thin edge, thus providing for optimal retaining of the insulation panel and for application of thin render. ▪ While flush installation the anchor washer can be combined with larger insulation disc DT 90, DT 110 and DT 140 for very soft insolation materials. ▪ For insulation material thicknesses up to 340 mm. ▪ Standard embedment depth for all building materials. ▪ Attachment of ETICS insulating boards on concrete and masonry ▪ Flush installation in all conventional insulation materials ▪ Flush installation of insulation materials such as polystyrene rigid foam panels and dense mineral wool panels ▪ The fixing is pushed through the insulation into the drilled hole and is screwed tight. ▪ For recessed installation, you require the installation tool termoz CS. ▪ Optionally, the installation tool termoz CS can also be used for flush installation by turning the disc. ▪ For recessed installation, the insulation disc is to be covered with a round plug. ▪ When using the installation tool, the installation is completed when the stop disc is flush with the insulation panel. ▪ For lengths from 250 mm the optional supplied bits T 25 are required.
71 Stránky | Platí do 12/2025 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.
