Euroboor - Burrs and Machines Strana 30
Nabídka komerčních zákazníků **Nejlépe prodávané z Euroboor BV
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
CARBIDE BURRS AND MACHINE Before purchasing and/or using rotary burrs Euroboor advises to walk through the steps below. Purchasing the right rotary burr for each situation and application results in: 1 Please consider the materials you will use the burr on and select the correct cut. 2 Choose the right cut and consider the result you want. Choose the model that can do the job (model A – N) 3 Choose the shank diameter 4 Choose your burr diameter (D1) for the result that you want. For the best result see the recommended RPM’s of each burr, specified per material in the table on the next page. machine’s collet. After choosing the correct burr diameter (D1), refer to the table on the following page for the machine speed that is recommended for the best possible result, specified per material. Please keep in mind all safety advice and warnings. Operating: • Avoid excessive pressure to maintain optimal grinding speed and prevent damage. • Periodically dip the burr in wax to improve performance and extend its lifespan. • Maximize contact with the workpiece for a smoother finish. • Regularly check air pressure, fittings, and seals to maintain optimal RPM and power. • Prevent contact between the shank and the workpiece to avoid tool wear. • Use the correct speed for the material to achieve the best finish and removal rate, refer to the speed chart for guidance. • Replace dull burrs before they become too worn to ensure efficiency. 28
32 Stránky | Platí do 07/2026 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.
