Dynabrade - Industrial Katalog Strana 6
Nabídka komerčních zákazníků **Nejlépe prodávané z Dynabrade Europe Sarl
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Dynabrade Warranty Information Dynabrade Pneumatic Tools Limited Lifetime Warranty copy of original invoice indicating model and serial number. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND THERE ARE NO OTHER WARRANTIES THAT EXTEND BEYOND THIS EXPRESS WARRANTY. Dynabrade will not be liable for damages to products, other property, or persons due to improper use or through attempts to use products for other than their intended use. DYNABRADE WILL NOT BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY SPECIAL, CONTINGENT, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES. Dynabrade's liability with respect to a claim for any other damages arising out of or connected with the manufacture, sale, purchase, non-delivery, use or performance of any product sold by Dynabrade will in no event exceed to the price paid for the product. The Limited Lifetime Warranty applies only to portable pneumatic tools manufactured by Dynabrade, Inc. in the USA. Warranty applies only to the original tool owner; warranty is non-transferable. Dynabrade warrants all Dynabrade portable pneumatic power tools against defects in workmanship and materials under normal use and service for the lifetime of the tool as set forth herein. Upon examination and review at Dynabrade’s factory, Dynabrade shall confirm whether the tool qualifies for warranty status, in which case Dynabrade will repair or replace the tool at no charge to the customer. This warranty is contingent upon proper use of the tool in accordance with factory recommendations, instructions and safety practices. It shall not apply to tool that has been subjected to misuse, negligence, accident or tampering in any way so as to affect its normal performance. This warranty does NOT cover normally wearable parts and accessories, including, but not limited to, bearings, contact wheels, rotor blades, regulators, valve stems, levers, shrouds, guards, O-rings, seals, gaskets and other wearable parts. Dynabrade only warrants such normally wearable parts and accessories against manufacturing defects at the time of receipt. If, upon receipt and prior to use, a normally wearable part or accessory is found to be defective, Dynabrade will repair or replace such part or accessory at no charge to the customer. To activate Limited Lifetime Warranty, customer must register each portable pneumatic power tool at www17.dynabrade.com/warranties.html. Dynabrade will not honor Limited Lifetime Warranty on unregistered tools. A one-year warranty will be honored on all unregistered portable pneumatic power tools. (In European countries, warranty on unregistered tools will be two years.) Customer must return the defective unregistered tool to Dynabrade within one year (or two years in European countries) from the date of purchase. To be considered for warranty, tools must be sent back to our factory along with Flat Rate Repair/Warranty form; transportation prepaid by user. Please send tool back to attention “Repair Department” with note fully explaining the nature of the problem along with a copy of original invoice indicating model and serial number. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND THERE ARE NO OTHER WARRANTIES THAT EXTEND BEYOND THIS EXPRESS WARRANTY. Dynabrade will not be liable for damages to products, other property or persons due to improper use or through attempts to use products for other than their intended use. DYNABRADE WILL NOT BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY SPECIAL, CONTINGENT, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES. Dynabrade's liability with respect to a claim for any other damages arising out of or connected with the manufacture, sale, purchase, non-delivery, use or performance of any product sold by Dynabrade will in no event exceed to the price paid for the product. Dynabrade Renny Doyle Series® Tools One Year Warranty Dynabrade warrants all “Dynabrade Renny Doyle Series®” tools against defects in workmanship and materials under normal use and service for a period of one year from the date of end user proof of purchase as set forth herein. Customer must return the defective tool to Dynabrade within one year from the date of end user proof of purchase. Upon examination and review at Dynabrade’s factory, Dynabrade shall confirm whether the tool qualifies for warranty status, in which case Dynabrade shall replace the tool at no charge to the customer. This warranty is contingent upon proper use of the “Dynabrade Renny Doyle Series®” tool in accordance with factory recommendations, instructions and safety practices. The warranty shall not apply in these cases: (a) tool that has been subjected to misuse, negligence, accident or tampering in any way to affect its normal performance. (b) including, but not limited to, bearings, regulators, valve stems, levers, shrouds, guards, O-rings, seals, gaskets, brushes, cords, plugs, and other wearable parts.; (c) consumables such as sanding pads, etc.; (d) misuse, neglect in maintaining tool or tool modification; (e) evidence of rust, dirt or corrosion; (f) tools requiring normal tune-up or cleaning; (g) tools being used after they are badly worn; (h) use in production-type applications. Dynabrade only warrants such normally wearable parts and accessories against manufacturing defects at the time of receipt. If, upon receipt and prior to use, a normally wearable part or accessory is found to be defective, Dynabrade will repair or replace such part or accessory at no charge to the customer. To be considered for warranty, tools must be sent back to our factory along with Flat Rate Repair/Warranty form; transportation prepaid by user. Please send tool back to attention “Repair Department” with note fully explaining the nature of the problem along with a copy of original invoice indicating model and serial number. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND THERE ARE NO OTHER WARRANTIES THAT EXTEND BEYOND THIS EXPRESS WARRANTY. Dynabrade will not be liable for damages to products, other property, or persons due to improper use or through attempts to use products for other than their intended use. DYNABRADE WILL NOT BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY SPECIAL, CONTINGENT, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES. Dynabrade's liability with respect to a claim for any other damages arising out of or connected with the manufacture, sale, purchase, non-delivery, use or performance of any product sold by Dynabrade will in no event exceed to the price paid for the product. Dynabrade Nitro Series® Tools One Year Warranty Dynabrade warrants all “Dynabrade Nitro Series®” tools against defects in workmanship and materials under normal use and service for a period of one year from the date of end user proof of purchase as set forth herein. Customer must return the defective tool to Dynabrade within one year from the date of end user proof of purchase. Upon examination and review at Dynabrade’s factory, Dynabrade shall confirm whether the tool qualifies for warranty status, in which case Dynabrade shall replace the tool at no charge to the customer. This warranty is contingent upon proper use of the “Dynabrade Nitro Series®” tool in accordance with factory recommendations, instructions and safety practices. The warranty shall not apply in these cases: (a) tool that has been subjected to misuse, negligence, accident or tampering in any way to affect its normal performance. (b) including, but not limited to, bearings, contact wheels, rotor blades, regulators, valve stems, levers, shrouds, guards, O-rings, seals, gaskets, brushes, cords, plugs, and other wearable parts.; (c) consumables such as sanding pads, etc.; (d) misuse, neglect in maintaining tool or tool modification; (e) evidence of rust, dirt or corrosion; (f) tools requiring normal tune-up or cleaning; (g) tools being used after they are badly worn; (h) use in production-type applications. Dynabrade only warrants such normally wearable parts and accessories against manufacturing defects at the time of receipt. If, upon receipt and prior to use, a normally wearable part or accessory is found to be defective, Dynabrade will repair or replace such part or accessory at no charge to the customer. To be considered for warranty, tools must be sent back to our factory along with Flat Rate Repair/Warranty form; transportation prepaid by user. Please send tool back to attention “Repair Department” with note fully explaining the nature of the problem along with a Dynabrade Electric Tools One Year Warranty Following the reasonable assumption that any inherent defect which might prevail in a product will become apparent to the user within one year from the date of end user proof of purchase, Dynabrade electric tools are warranted against defects in workmanship and materials under normal use and service. We shall, at our option, repair or replace at our factory any Dynabrade electric tool which shall, within one year after delivery to the original purchaser, indicate upon our examination to have been defective. Our obligation is contingent upon proper use of Dynabrade electric tools in accordance with factory recommendations, instructions and safety practices. The warranty shall not apply in these cases: (a) tool that has been subjected to misuse, negligence, accident or tampering in any way to affect its normal performance. (b) including, but not limited to, bearings, contact wheels, rotor blades, regulators, valve stems, levers, shrouds, guards, O-rings, seals, gaskets, brushes, cords, plugs, and other wearable parts.; (c) consumables such as sanding pads, etc.; (d) misuse, neglect in maintaining tool or tool modification; 6
316 Stránky | Platí do 07/2026 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.