CIMCO - Main Catalogue Strana 386
Nabídka komerčních zákazníků **Produkty z katalogové stránky
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Technical appendix, numerical lisT, index, sales 1 2 3 safeTy TOOls Insulated safety tools and insulated protective agents have been developed for use during work on live parts. Their use should not, however, be a “blank cheque” for the user; rather applicable regulations (including accident prevention regulations, VBG, DIN, VDE and others) must always be observed and followed. Upon request we will gladly send you specifics and additional informational material. 4 5 6 Cutting hardness in HRC with cutting bevel single joint Flat nose pliers Wire type soft Wire type piano VDE/GS tested Ridged gripping surfaces With slight cutting bevel Lap joint Flat-round pliers Wire type medium-hard Wire type rope Box joint Round nose pliers Wire type hard Wire type Cu-cable Gripping surfaces ridged at an angle funCTiOnal desCRiPTiOn Of The wiRe sTRiPPeRs – Set the adjusting screw to the desired conductor cross section to be stripped by turning it (left/right). – Secure the adjusting screw with the counter nut. – Insert the cable. – Press the pliers closed and remove the plastic sheathing. 10 12 13 14 15 16 17 18 19 20 ClassifiCaTiOn Of CimCO sCRewing TOOls aCCORding TO Cross–head Phillips ThRead ø mm Cross–head Pozidriv Threaded ø mm 2.5 – 3.0 3.5 – 5.0 6.0 Threaded ø mm 2,0 – 3,0 2,5 – 3,0 3,5 – 4,8 5,5 – 7,0 Tool holder Size 1 Size 2 Size 3 wood screws din 96 Threaded Tool ø mm holder 3 6.0 x 0.8 3.5 7.0 x 0.8 4 8.0 x 1.0 4.5 9.0 x 1.0 5 10.0 x 1.2 6 12.0 x 1.6 english and ameRiCan uniTs Of measuRemenT weights 1 ounce 1 pound (lb) 1 UK ton 1 US ton 1 kp 28.349 g 0.454 kg 1.016 t 0.907 t 10 Newtons length units 1 inch 1 foot 1 yard 1 mile 25.4 mm 0.3048 m 0.914 m 1.609 km 23 24 TORX® Threaded ø mm 3,0 – 3,5 4,0 – 4,5 5,0 – 6,0 Tool holder Gr. 0 Gr. 1 Gr. 2 Gr. 3 Tool holder T 10 T 20 T 25 hex–head machine screws din Threaded Tool ø mm holder 2.5 Size 5 3.0 Size 5.5 4.0 Size 7 5.0 Size 8 6.0 Size 10 8.0 Size 13 10.0 Size 17 Cylinder head screws din 84 Threaded Tool ø mm holder M3 5.5 x 0.8 M4 7.0 x 1.2 M5 8.5 x 1.2 M6 10.0 x 1.6 M8 13.0 x 2.0 21 22 VDE specification 0682, part 201. Energised work IEC60900:2018 9 11 Insulated hand tools tested according to 1000 V European standard EN 60900 or resp. desCRiPTiOn Of The symbOls 7 8 Insulated hand tools, tested and VDE-certified according to European standard EN 60900 or resp. VDE specification 0682, part 201. 1000 V Threaded ø mm 12.0 14.0 16.0 20.0 24.0 30.0 Tool holder Size 19 Size 22 Size 24 Size 30 Size 36 Size 46 PaRameTeRs fOR insTalling sTRaddling dOwels Dowel–ø mm 5 6 8 10 12 14 16 20 Dowel length mm 25 30 40 50 60 70 80 90 Drill hole depth mm 35 40 55 70 75 85 95 110 Drill ø mm 5 6 8 10 12 14 16 20 Bolt ø mm 2.5 – 4 3.5 – 5 4.5 – 6 6 – 8 8 – 10 10 – 12 12 – 14 16 aCCORding TO din Vde 0220 PaRT 2 sCRews Of sTRengTh Class 8.8 aRe TighTened wiTh The fOllOwing TORques: Thread size M5 M6 M7 M8 M 10 Tightening torque (Nm) 5 9 15 22 44 Thread size M 12 M 14 M 16 M 20 M 10 25 26 386 Advice and ordering: Phone: 02191 3718-01, Fax: 02191 3718-85, E-Mail: [email protected] Tightening torque (Nm) 75 120 190 380 44
420 Stránky | Platí do 12/2022 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.