Bosch Air tools for industry catalog Strana 108
Nabídka komerčních zákazníků **Nejlépe prodávané z Bosch Blau
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
108 | Air technology guide The maintenance unit For optimum lifetime Despite various measures (drainage systems etc. after the compressor), it cannot be avoided that the compressed air cools down further the longer the pipes are and, therefore, releases water again. Scale and rust C consumption optimised L lubrication free E ergonomic A air tool N noise reduction can also occur – especially on older pipes. However, these constituents are separated if a compressed-air filter is installed shortly before the tool. A pneumatic oiler should certainly be installed downstream of the filter, in order to mix an oil mist with the throughflowing compressed air. This oil is required for lubrication of the air motor, especially in continuous operation. The clean solution for air screwdrivers Maintenance units should be connected as close as Bosch has developed a new generation of air tools: possible to the tool. Their size must correspond to the the CLEAN series. “CLEAN” stands for consumption air throughput at the supply point. If a certain operat- optimised, lubrication free, ergonomic, air tool and ing pressure is desired or pressure fluctuations from noise reduction. the supply lines are to be compensated, a pressure controller with manometer can be fitted in the main- The advantages: tenance unit between the filter and lubricator (Fig. 2). ▶ Up to 30% less air consumption than conventional To achieve the longest possible lifetime of tools, the compressed air must be prepared by means of a maintenance unit. More details can be found in the operat- air tools ▶ This reduces energy costs and protects the environment ing instructions for air tools. ▶ The tools are driven with oil-free compressed air – Oil for the maintenance unit or direct lubrication: ▶ No soiling of workpieces, the workplace stays clean Motor oil SAE 20 or SAE 10. ▶ The CLEAN screwdrivers are considerably quieter but also work with air containing oil than other air screwdrivers You will find suitable maintenance units at: www.boschrexroth.com/pneumatics-catalog Fig. 2 Maintenance unit
116 Stránky | Platí do 06/2024 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.