BILZ - Spannsysteme Strana 5
Nabídka komerčních zákazníků **Nejlépe prodávané z BILZ WERKZEUGFABRIK
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
3D Synchro Synchro-Gewindeschneidfutter Synchro Tapping Chuck Beste Einsatzmöglichkeiten Unser 3D-Synchro Futter können Sie als Spannzangenfutter für angetriebene Werkzeugaufnahmen, sowie für die Direktspannung in Maschinenspindeln einsetzen. Best application You can use our 3D-Synchro chuck as a collet chuck for driven tool holders as well as for direct clamping in machine spindles. 220%*1 STANDMENGE DES GEWINDEBOHRERS STAND QUANTITY OF THE TAP 200%*2 SCHNITTGESCHWINDIGKEIT CUT SPEED 80 BAR KÜHLMITTELDRUCK (STATT 50BAR) COOLANT PRESSURE (instead of 50bar) Drehrichtung Dämpfen beim Spanbrechen Directionof rotation Damping during chip breaking Zugrichtung Kompensieren der Synchronisationsfehler Direction of pull Compensate the synchronization errors Druckrichtung Dämpfen beim Anschnitt Print direction Steaming at the gate *1 220% Standmenge des M8 Gewindebohrers beim Dauerversuch mit n= 560 min-1 in X37CrMoV5-1 (Rm= 770 N/mm2) mit dem S3D Synchrofutter im Vergleich zu 100% Standmenge mit einem Standard-Spannzangenhalter. *2 200% Schnittgeschwindigkeit = 25 m/min mit M10 Gewindebohrer in Grauguss GG20 (Rm > 200 N/mm2) mit dem S3D Synchrofutter im Vergleich zu 100% = 12,5 25 m/min mit einem Standard-Spannzangenhalter bei gleichbleibender Gewindequalität und Toleranzhaltigkeit. Mit dem Standard-Spannzangenhalter konnte die die Schnittgeschwindigkeit nicht erhöht werden, da sonst die Gewinde nicht mehr Toleranzhaltig waren. *1 220% tool life of M8 tap in endurance test at n= 560 min-1 in X37CrMoV5-1 (Rm= 770 N/mm2) with the S3D Synchro chuck compared to 100% tool life with a standard collet holder. *2 200% cutting speed = 25 m/min with M10 tap in grey cast iron GG20 (Rm > 200 N/mm2) with the S3D Synchro chuck compared to 100% = 12.5 25 m/min with a standard collet holder while maintaining thread quality and tolerance. With the standard collet chuck, the cutting speed could not be increased, otherwise the threads would no longer be within tolerance. SCK 4 Clamping Systems
186 Stránky | Platí do 07/2025 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.
