AMF Catalogue ZERO-POINT SYSTEMS Strana 67
Nabídka komerčních zákazníků **Nejlépe prodávané z AMF Spannsysteme
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Clamping module, mechanical, with indexing No. 6208IM Clamping module, mechanical, with indexing Mechanical opening and closing. Tempered steel, plasma-nitrided and burnished. Repetition accuracy < 0.01 mm. Order no. Size Pull-in/locking force up to Holding force* Tightening torque Weight [kN] [kN] [Nm] [g] 559680 BM10 6 17 30 1031 562355 BM20 10 43 30 3295 Application: Mechanical zero point clamping system with indexing grooves offset by 90° for time-optimised clamping during cutting and non-cutting machining. Especially suitable for the modular design of clamping solutions via zero point clamping system. Note: The mechanical assembly clamping module with indexing notches offset by 90° has high holding, pull-in and locking forces. The clamping module can be positioned on the machine table and fastened with standard clamping elements at the circumferential clamping rim. The positioning bore for stop sleeves and a through-hole for fastening onto grid plates with countersunk head screws are present underneath (observe the max. permitted screw force). The mounting bore for the 20 pull-stud is also in the module. Pull-stud: The zero point, timing or undersize pull-stud (without colour coding) can be used, depending on the application. The BM10 clamping module can only be used with the size 10 pullstuds in the M8 version, BM20 only with the size 20 pull-studs in the M12 version. A cylinder pin, as well as fastening bolts for use with the support elements (6210S) or for use on a fixture, are supplied as standard. This clamping module can be used at ambient temperatures of up to 200°C. * Please observe the installation instructions. Dimensions: Order no. CAD Size dia. dia. dia. D1 B1 D 0/+0,01 dia. D2 F7 dia. DN E1 H ±0.01 H1 H2 H3 559680 BM10 9,0 78 15 - 22 4,5 32 22,0 562355 BM20 13,5 112 25 16 32 10,0 50 35,5 20 11 - - K F6 L R S1 SW 8 93 50 8 132 80 5,5 13 - 10 Subject to technical alterations. ANDREAS MAIER GmbH & Co. kg ∙ Phone: +49 711 5766-196 ∙ Web: www.amf.de ZERO-POINT-SYSTEMS 67
228 Stránky | Platí do 12/2025 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.
