AMF Catalogue ZERO-POINT SYSTEMS Strana 10
Nabídka komerčních zákazníků **Nejlépe prodávané z AMF Spannsysteme
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
faQs aBOut ZerO-pOint Clamps and the amf ZerO-pOint sYstem are suBjeCt tO the amf ZerO-pOint Clamping mOdule defined in standard din en isO 13849? > yes, the amF zero-point clamping modules in sizes kP, kH and Bm were designed using the fundamental and proven safety principles defined in en iSo 13849-2, table a.1 and a.2 or B.1 and B.2, or table c.1 and c.2. the user is obliged to comply with these safety principles during the implementation and operation of our products. what is pull-in fOrCe / hOlding fOrCe? the pull-in force describes the force with which the stud is pulled in and clamped with positive interlocking in the clamping > module. the holding force, in contrast, specifies the maximum permissible pull force of the engagement screw. what is repeataBilit Y? the repeatability specifies the tolerance range within which the recorded reference points on the workpiece lie after > removal and reclamping of the same workpiece. the repeatability, also called repetition accuracy, is below 0.005mm. what advantages result frOm the use Of ZerO-pOint, timing and undersiZe pull-studs? these different types of pull-studs offset the spacing tolerances of pull-studs and clamping modules. > the fixed reference point is achieved through the zero-point pull-stud; the slit pull-stud serves to compensate for the still-free axis. the under size pull-stud does not have a centring function, but only a clamping and holding function. Can i insert the pull-stud direCtlY intO the wOrkpieCe fOr maChine prOCessing? the high costs for chucking fixtures and workpiece clamping can be effectively saved here if the pull-studs are mounted > in the workpiece, which is clamped directly using the clamping modules. as a result, a complete 5-sided processing of the workpiece is possible in one chucking. With the different stud sizes (attaching thread m6 to m16), workpieces of different sizes can be clamped. hOw dOes the sYstem COmpensate fOr heat, suCh as frOm metal Cutting? > through the different pull-stud designs, the system can compensate for temperature differences between the workpiece and the clamping module easily and controllably. For a graphic depiction of the stud array, see page 124 of the catalogue. if you have other technical questions, please contact us at any time. Subject to technical alterations. 10 ZERO-POINT-SYSTEMS ANDREAS MAIER GmbH & Co. KG ∙ Phone: +49 711 5766-196 ∙ Web: www.amf.de
228 Stránky | Platí do 12/2025 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.