AMF Catalogue Hydraulic clamping systems Strana 94
Nabídka komerčních zákazníků **Nejlépe prodávané z AMF Spannsysteme
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
pull cylinder No. 6951FZP Pull Cylinder, base-flange-mounting, with guided piston rod CAD Single-acting, with spring return, max. operating pressure 350 bar, min. operating pressure 52 bar. Article no. Order no. Pull force at 350 bar Stroke N Vol. pull Q max. Weight [kN] [mm] [cm³] [l/min] [g] 2,2 14,5 0,92 0,165 463 66480 6951FZP-02-10 66522 6951FZP-05-10 6,6 20,0 3,82 0,400 1150 66563 6951FZP-11-10 13,9 29,5 11,90 1,640 2050 Design: Cylinder barrel from steel, hardened and burnished. Piston rod case hardened and chrome plated. Piston rod with internal thread and clamping arm positioning. O-ring for flange seal. Wiper at piston rod. Return spring from stainless steel. Oil supply via threaded connection or oil channel in the fixture body. Application: Universal Push-Pull Cylinder for various applications. Features: Each cylinder size is available for single or double-acting operation. Various thrust pieces can be attached in the tapped piston rod ends. Clamps can be attached, as with the swing clamps. Note: The piston is guided, therefore, the max. permissable oil flow rate Q max. must be observed in order to protect the mechanism. No force must be introduced at the piston when mounting accessory. For single acting cylinders there is risk of sucking in coolant through the breather port. In such cases the breather port has to be piped to a clean protected area. The system has to be completely vented during installation. For positioning the clamping arm Drilling template device: AC oil connection vent screw size 02, 05 Ø4 oil connection bore unclamp double acting size 11 Ø4 oil connection bore clamp single and double-acting A size 02, 05 size 11 = clamp Dimensions: Order no. Article no. dia. A C D F G dia. H J x depth dia. K L P Q R S T V W X Y Z° AC ØAD BB OR-1 O-ring Order No. 66480 6951FZP-02-10 26,5 103 71,0 26,5 13,5 11,13 M6 x 7 6 10,5 45,0 20,0 10,0 31,0 47 15,5 - 17,3 18,2 30,0 G1/8 3,2 M5 183608 66522 6951FZP-05-10 38,0 135 92,5 25,0 15,0 15,88 M10 x 12 7 20,5 57,0 25,0 12,5 33,5 54 19,0 - 21,7 14,3 30,0 G1/8 4,8 M6 183608 66563 6951FZP-11-10 45,5 173 112,5 28,5 16,5 22,23 M12 x 13 9 11,9 55,5 29,7 21,0 42,0 71 27,5 21 21,0 28,6 22,5 G1/4 4,8 M8 183608 Subject to technical alterations. 94 Hydraulic clamping systems ANDREAS MAIER GmbH & Co. kg ∙ Phone: +49 711 5766-196 ∙ Web: www.amf.de
384 Stránky | Platí do 12/2025 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.