AMF Catalogue Hydraulic clamping systems Strana 90
Nabídka komerčních zákazníků **Nejlépe prodávané z AMF Spannsysteme
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
pull cylinder No. 6951KZP Pull Cylinder, top-flange-mounting, with guided piston rod CAD Single-acting, with spring return, max. operating pressure 350 bar, min. operating pressure 52 bar. Article no. Order no. Pull force at 350 bar Stroke N Vol. pull Q max. Weight [kN] [mm] [cm³] [l/min] [g] 2,2 14,5 0,92 0,165 372 66498 6951KZP-02-10 66530 6951KZP-05-10 6,6 20,0 3,82 0,40 903 66571 6951KZP-11-10 13,9 29,5 11,90 1,64 1520 Design: Cylinder barrel from steel, hardened and burnished. Piston rod case hardened and chrome plated. Piston rod with internal thread and clamping arm positioning. O-ring for flange seal. Wiper at piston rod. Return spring from stainless steel. Oil supply via threaded connection or oil channel in the fixture body. Application: Universal Push-Pull Cylinder for various applications. Features: Each cylinder size is available for single or double-acting operation. Various thrust pieces can be attached in the tapped piston rod ends. Clamps can be attached, as with the swing clamps. Note: The piston is guided, therefore, the max. permissable oil flow rate Q max. must be observed in order to protect the mechanism. No force must be introduced at the piston when mounting accessory. For single acting cylinders there is risk of sucking in coolant through the breather port. In such cases the breather port has to be piped to a clean protected area. The system has to be completely vented during installation. For positioning the clamping arm Drilling template device: oil connection vent screw size 02, 05 size 11 A Ø4 oil connection bore unclamp double acting = clamp Ø4 oil connection bore clamp single and double-acting size 11 size 02, 05 Dimensions: Order no. Article no. dia. A C D F G dia. H J x depth dia. K M6 x 7 L P Q R S T V U W X Y Z° AC ØAD BB dia. CC OR-1 O-ring Order No. 66498 6951KZP-02-10 25,2 101,5 44,0 26 13,0 11,13 6 10,5 45,0 20,0 10,0 31,0 47 15,5 18,0 - 17,3 18,2 30,0 G1/8 3,2 M5 26 183608 66530 6951KZP-05-10 36,3 134,0 64,5 27 13,0 15,88 M10 x 12 7 20,5 57,0 25,0 12,5 33,5 54 19,0 19,0 - 21,7 14,4 30,0 G1/8 4,8 M6 37 183608 66571 6951KZP-11-10 44,2 172,0 81,0 30 14,5 22,23 M12 x 13 9 11,8 55,5 29,7 21,0 42,0 71 27,5 22,1 21 21,0 28,6 22,5 G1/4 4,8 M8 45 183608 Subject to technical alterations. 90 Hydraulic clamping systems ANDREAS MAIER GmbH & Co. kg ∙ Phone: +49 711 5766-196 ∙ Web: www.amf.de
384 Stránky | Platí do 12/2025 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.
