Alfa Main Catalogue Strana 57
Nabídka komerčních zákazníků **Nejlépe prodávané z ALFRA
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
Bez dopravy
ALFRA BUSBAR BENDING AND HOLE PUNCHING DEVICE Busbars at 120 x 12 mm can easily be bent using a universal working cylinder, and holes of Ø 6.6 up to 21.5 mm including oblong holes can be punched through the simple insertion of hole punchers. Bending busbars Turn switch to “bend” To bend busbars, the bending die is inserted in the hydraulic piston and the electric angle measurer is placed in the round guidance crew on the counter block. The contact cable is connected to the electric motor. The required angle is fixed on the angle scale using an adjusting screw. Since copper springs back, we recommend making a setting 1° - 3° above the required angle depending on the material thickness. You should check the first bending angle. This bending angle can be reproduced as often as required since the bending process is automatically interrupted on achieving the angle by the electrical contact switch. Technical data Bending Bending Cu max: 120 x 12 mm Bending up to: more than 90° smallest leg length: 50 mm smallest U-bend: 100 mm smallest Z-bend: 72 mm (depending on material thickness) The values stated are based on copper rails 120 x 10 mm Punching busbars Switch setting to “punch” The puncher with the neoprene scraper and the matching die are placed in the locating hole. The puncher is fixed sideways using a grub screw. Depending on the busbar width and the required hole arrangement, the processing block can be infinitely variably raised or lowered hydraulically using the handwheel. A counter attached to the handwheel shows the height of the hole centre in millimetres. We recommend centre-punching the busbar and then aligning the puncher centring point above the centre puncher to guarantee a precise hole location. The neoprene scraper and a fitted electronic sensor ensure automatic puncher retraction. Technical data Punching Punching Cu: Material thickness Cu max: Material width up to: External dimensions L x W x H: Weight: 6.6 - 21.5 mm also oblong hole up to max. L = 21 mm 12 mm 110 mm central 700 x 410 x 410 mm 60 kg 57
200 Stránky | Platí do 12/2025 | Previous page | Další stránka
Vyberte si jazyk
Legální problémy
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Formulář žádosti o speciální produkty
Služba nákupu ToolTeam®
Hledáte produkty, které jsou uvedeny v katalogu, ale nelze je zakoupit přímo online?Naše služba nákupu vám ráda zpracuje nezávaznou a individuální nabídku.